MG Chemicals Sn63/Pb37 No Clean Solder Wire 0.81mm/0.032" Dia, 227g Deep bent tips suit perfectly the

bent tips suit perfectly the tin wire position supplied by the AP130

NOTE: Iron and cartridges shown in image are not included

Keys with ball end on the long arm and conventional ends on short arm

Prospective earth fault current (PEFC) or Prospective short circuit current (PSC) determined by dividing measured mains voltage by measured loop (L-PE) resistance or line (L-N) resistance

Packed in a steel carrying case with EVA foam insert

MG Chemicals Sn63/Pb37 No Clean Solder Wire 0.81mm/0.032" Dia, 227g Deep bent tips suit perfectly theOverview The 48604867 Sn63 Pb37 No Clean Solder Wire is an electronic grade solder wire. It uses the eutectic tin to lead alloy ratio, which is complemented with a no clean, synthetically refined, splatter proof, resin flux core. The solder wires meet J STD 004B, ASTM B 32, and exceeds J STD 006C specifications. It is one of the easiest solders to work with because it offers a low melting temperature with a sharp melting solidification point, which