CAB Blade 2.5 L vendor_B&W Robust protective Holster

Robust protective Holster

The design allows selection of one blade at a time

SV-NN Needle Nose Nozzle

Ball end Tip Hex Key L-Wrench

Printer Application

CAB Blade 2.5 L vendor_B&W Robust protective HolsterOverview The L Blade will be used if there are small distances between the off cuts. Note: To ensure the blade will not be jammed in the PCB, the blade should be at least 0. 15mm smaller as the milled groove. Specifications Width of Milled Groove: 2. 5 Recommended Blade Thickneess: 2. 35 Length of Blade: 12. 0 Length of Cut: 5. 7 Free of Compon. on Solder Side: >15 Length of Milled Groove: >13 Width of Off Cut: 3. 0