RUKO Bi-metal Hole Saw HSSE-Co 8 with Regular Fine Pitch Toothing Ø 114mm vendor_JENSEN_GLOBAL positioning beams

positioning beams

Smear-Resistant Maximum Wire Gauge

tweezers with ESD coating

a large soft grip tri-lobe handle for exceptional comfort and high torque turns

The longevity of the element is also greatly extended because the annealed portion of the element is used mainly for ringing (separating) the insulation rather than pulling off the slug

RUKO Bi-metal Hole Saw HSSE-Co 8 with Regular Fine Pitch Toothing Ø 114mm vendor_JENSEN_GLOBAL positioning beamsOverview The fine toothing is particularly suitable for cutting metals. It ensures smoother running and reduces the necessary effort. The reduction in heat development during cutting increases tool life, especially in the case of metals. Suitable for alloyed and non alloyed steels (up to 1. 000 N mm strength), high chromium alloyed steels such as stainless steel, steels resistant to rusts and acids, non ferrous and light metals. The RUKO bi metal hole